Use and usability of custom-made orthopedic shoes

The goal of this study was to investigate the use of custom-made orthopedic shoes (OS) and the association between the use of OS and the most relevant aspects of their usability. Over a 6-month period, patients meeting the inclusion criteria were recruited by 12 orthopedic shoe companies scattered throughout the Netherlands and asked to complete a questionnaire composed of a pre- and post-OS section. Patients with different pathologies were included in the study (n = 339; response 67%). Mean age of the patients was 63 +/- 15 years, and 38% were male. Three months after delivery, 81% of the patients used their OS frequently (4-7 days/week), 13% occasionally (1-3 days/week), and 6% did not use their OS. Associations were found between use and all measured aspects of usability (p-values varied from <0.001 to 0.028). Patients who used their OS more often had a more positive opinion regarding all the aspects of usability. We conclude that all aspects of the usability of OS are relevant in relation to their use and should be taken into account when prescribing and evaluating OS

Optimal Taylor-Couette flow: Radius ratio dependence

Taylor-Couette flow with independently rotating inner (i) and outer (o) cylinders is explored numerically and experimentally to determine the effects of the radius ratio {\eta} on the system response. Numerical simulations reach Reynolds numbers of up to Re_i=9.5 x 10^3 and Re_o=5x10^3, corresponding to Taylor numbers of up to Ta=10^8 for four different radius ratios {\eta}=r_i/r_o between 0.5 and 0.909. The experiments, performed in the Twente Turbulent Taylor-Couette (T^3C) setup, reach Reynolds numbers of up to Re_i=2x10^6$ and Re_o=1.5x10^6, corresponding to Ta=5x10^{12} for {\eta}=0.714-0.909. Effective scaling laws for the torque J^{\omega}(Ta) are found, which for sufficiently large driving Ta are independent of the radius ratio {\eta}. As previously reported for {\eta}=0.714, optimum transport at a non-zero Rossby number Ro=r_i|{\omega}_i-{\omega}_o|/[2(r_o-r_i){\omega}_o] is found in both experiments and numerics. Ro_opt is found to depend on the radius ratio and the driving of the system. At a driving in the range between {Ta\sim3\cdot10^8} and {Ta\sim10^{10}}, Ro_opt saturates to an asymptotic {\eta}-dependent value. Theoretical predictions for the asymptotic value of Ro_{opt} are compared to the experimental results, and found to differ notably. Furthermore, the local angular velocity profiles from experiments and numerics are compared, and a link between a flat bulk profile and optimum transport for all radius ratios is reported.Comment: Submitted to JFM, 28 pages, 17 figure

Genomic prediction and quantitative trait locus discovery in a cassava training population constructed from multiple breeding stages

Open Access Article; Published online: 11 Dec 2019Assembly of a training population (TP) is an important component of effective genomic selection‐based breeding programs. In this study, we examined the power of diverse germplasm assembled from two cassava (Manihot esculenta Crantz) breeding programs in Tanzania at different breeding stages to predict traits and discover quantitative trait loci (QTL). This is the first genomic selection and genome‐wide association study (GWAS) on Tanzanian cassava data. We detected QTL associated with cassava mosaic disease (CMD) resistance on chromosomes 12 and 16; QTL conferring resistance to cassava brown streak disease (CBSD) on chromosomes 9 and 11; and QTL on chromosomes 2, 3, 8, and 10 associated with resistance to CBSD for root necrosis. We detected a QTL on chromosome 4 and two QTL on chromosome 12 conferring dual resistance to CMD and CBSD. The use of clones in the same stage to construct TPs provided higher trait prediction accuracy than TPs with a mixture of clones from multiple breeding stages. Moreover, clones in the early breeding stage provided more reliable trait prediction accuracy and are better candidates for constructing a TP. Although larger TP sizes have been associated with improved accuracy, in this study, adding clones from Kibaha to those from Ukiriguru and vice versa did not improve the prediction accuracy of either population. Including the Ugandan TP in either population did not improve trait prediction accuracy. This study applied genomic prediction to understand the implications of constructing TP from clones at different breeding stages pooled from different locations on trait accuracy

Improving root characterisation for genomic prediction in cassava

Open Access Journal; Published online: 14 May 2020Cassava is cultivated due to its drought tolerance and high carbohydrate-containing storage roots. The lack of uniformity and irregular shape of storage roots poses constraints on harvesting and post-harvest processing. Here, we phenotyped the Genetic gain and offspring (C1) populations from the International Institute of Tropical Agriculture (IITA) breeding program using image analysis of storage root photographs taken in the field. In the genome-wide association analysis (GWAS), we detected for most shape and size-related traits, QTL on chromosomes 1 and 12. In a previous study, we found the QTL on chromosome 12 to be associated with cassava mosaic disease (CMD) resistance. Because the root uniformity is important for breeding, we calculated the standard deviation (SD) of individual root measurements per clone. With SD measurements we identified new significant QTL for Perimeter, Feret and Aspect Ratio on chromosomes 6, 9 and 16. Predictive accuracies of root size and shape image-extracted traits were mostly higher than yield trait prediction accuracies. This study aimed to evaluate the feasibility of the image phenotyping protocol and assess GWAS and genomic prediction for size and shape image-extracted traits. The methodology described and the results are promising and open up the opportunity to apply high-throughput methods in cassava

Development and reproducibility of a short questionnaire to measure use and usability of custom-made orthopaedic shoes

Objective: To develop a short and easy to use questionnaire to measure use and usability of custom-made orthopaedic shoes, and to investigate its reproducibility.\ud Design: Development of the questionnaire (Monitor Orthopaedic Shoes) was based on a literature search, expert interviews, 2 expert meetings, and exploration and testing of reproducibility. The questionnaire comprises 2 parts: a pre part, measuring expectations; and a post part, measuring experiences.\ud Patients: The pre part of the final version was completed twice by 37 first-time users before delivery of their orthopaedic shoes. The post part of the final version was completed twice by 39 first-time users who had worn their orthopaedic shoes for 2–4 months.\ud Results: High reproducibility scores (Cohen’s kappa > 0.60 or intra class correlation > 0.70) were found in all but one question of both parts of the final version of the Monitor Orthopaedic Shoes questionnaire. The smallest real difference on a visual analogue scale (100 mm) ranged from 21 to 50 mm. It took patients approximately 15 minutes to complete one part.\ud Conclusion: Monitor Orthopaedic Shoes is a practical and reproducible questionnaire that can measure relevant aspects of use and usability of orthopaedic shoes from a patient’s perspective

Genomic mating in outbred species: predicting cross usefulness with additive and total genetic covariance matrices

Open Access Article; Published online: 03 Sep 2021Diverse crops are both outbred and clonally propagated. Breeders typically use truncation selection of parents and invest significant time, land, and money evaluating the progeny of crosses to find exceptional genotypes. We developed and tested genomic mate selection criteria suitable for organisms of arbitrary homozygosity level where the full-sibling progeny are of direct interest as future parents and/or cultivars. We extended cross variance and covariance variance prediction to include dominance effects and predicted the multivariate selection index genetic variance of crosses based on haplotypes of proposed parents, marker effects, and recombination frequencies. We combined the predicted mean and variance into usefulness criteria for parent and variety development. We present an empirical study of cassava (Manihot esculenta), a staple tropical root crop. We assessed the potential to predict the multivariate genetic distribution (means, variances, and trait covariances) of 462 cassava families in terms of additive and total value using cross-validation. Most variance (89%) and covariance (70%) prediction accuracy estimates were greater than zero. The usefulness of crosses was accurately predicted with good correspondence between the predicted and the actual mean performance of family members breeders selected for advancement as new parents and candidate varieties. We also used a directional dominance model to quantify significant inbreeding depression for most traits. We predicted 47,083 possible crosses of 306 parents and contrasted them to those previously tested to show how mate selection can reveal the new potential within the germplasm. We enable breeders to consider the potential of crosses to produce future parents (progeny with top breeding values) and varieties (progeny with top own performance)

New Method for Phase transitions in diblock copolymers: The Lamellar case

A new mean-field type theory is proposed to study order-disorder transitions (ODT) in block copolymers. The theory applies to both the weak segregation (WS) and the strong segregation (SS) regimes. A new energy functional is proposed without appealing to the random phase approximation (RPA). We find new terms unaccounted for within RPA. We work out in detail transitions to the lamellar state and compare the method to other existing theories of ODT and numerical simulations. We find good agreements with recent experimental results and predict that the intermediate segregation regime may have more than one scaling behavior.Comment: 23 pages, 8 figure